Photoelectric Smoke Detector - White

Multi Sensor Detector

Heat Detector

Rate-Anticipation Heat Detector

Advanced Multicriteria Fire / CO Detector

Multi- Criteria Photo / Thermal / infrared Detectors

Multi Creteria + CO Detector

Carbon Monoxide Detector

Photoelectric Duct Smoke Detector

Addressssable Beam Smoke Detector

Very Intelligent Early Warning Detector

image

FSP-951

Photoelectric Smoke Detector - White

The FSP-951 photoelectric detector’s unique optical sensing chamber is engineered to sense smoke produced by a wide range of combustion sources. This intelligent, addressable detector includes point ID capability that enables each detector address to be set with rotary address switches to provide exact detector locations. The sensitivity can be programmed using the control panel software to suit the environment. In addition, the detector’s sensitivity is continually monitored and reported to the panel.

  • Sleek, low-profile design
  • Photoelectric smoke detection
  • Analogue communications
  • Low standby current
  • Rotary address switches
  • Dual LEDs for 360° visibility
Download Brochure
image

FST-951R

Intelligent Thermal (Heat) Detector – White/Rate-of-rise

The FST-951R intelligent addressable detector from Honeywell NOTIFIER features point ID capability that enables each detector address to be set with rotary address switches to provide exact detector locations. Ideal for both system operation and building design, this device is a low-profile, intelligent, rate-of-rise thermal sensor that provides cost-effective, intelligent property protection.

  • Rate-of-rise model, 15°F (8.3°C) per minute
  • Sleek, low-profile design
  • Thermal smoke detection
  • Analogue communications
  • Low standby current
  • Rotary address switches
  • Dual LEDs for 360° visibility
Download Brochure

Bases

B501-WHITE
image

Standard 4” Base

The B501-WHITE is a 4” standard European flangeless mounting base. It is UL/ULC listed.

B200S-WHITE
image

Sounder Base

The B200S Sounder Base adopts the same address as the detector, but uses a unique device type on the loop. It recognises the System Sensor synchronisation protocol.

B200S-LF-WH
image

Low-frequency Sounder Base

The B200S-LF-WH Sounder Base adopts the same address as the detector, but uses a unique device type on the loop. The Fire Alarm Control Panel (FACP) can use that address to command an individual sounder or a group of sounders to activate.

B224BI-WH
image

Isolator Detector Base

The B224BI-WH Isolator Detector Base is an intelligent device with a 6.2” diameter and 14 to 24 AWG wire gauge. It functions in a temperature range of 0°C to 49°C. [

Download Brochure