The Morley-EN DX Connexion range of fire alarm control panels are surprisingly easy to install and use. Simply fix the device to the wall, connect the field wiring, and in as few as four button presses later, you can have a compliant, working fire alarm system. Complete protection without any hassle or worry!

A range of single-loop, two-loop and four-loop control panels, each of which is fully addressable, programmable and offers support for multiple protocols.

DXc1 Single Loop Control Panel

This addressable, single loop fire detection system supports Morley protocol. It comes with two sounder circuits (1A max), a 2A power source, a general relay (Alarm and Fault), one programmable relay, fixed auxiliary output and resettable 24V 250mA output, two keys and two inputs for programmable functions. The panel also includes a 6 * 40 Character LCD display, an integrated USB port for PC programming and an RS485 port for repeaters. The DXc1 can operate as a stand-alone device or as part of a networked system with other DXc series panels in up to 16 loops.

The CD contains a loop and battery calculator, manuals and programming software to allow the display to be customised and address labels to be imported from an Excel file.

• Loop Capacity ( 99 Detectors +99 Devices)
• Networking up to 16 loops (Combination of 1; 2 & 4 Loops)
• 6x40 characters, blue liquid crystal display with backlight illumination
• Configuration by keypad and PC
• 160 Fire Zones
• Fire, Fault and Auxiliary relays
• Loop-Battery calculator for reliable system design
• 7 day timer
• Onboard diagnostic
• EN54-2, EN54- 4
• LPCB approved
• Optional: 40, 80 or 160 zone alarm LEDs

Download Brochure

DXc2 Two-loop Control Panel

This addressable Two-loop, multi-protocol fire detection system supports Morley protocol. It comes with two sounder circuits (1A max), a 2A power source, a general relay (Alarm and Fault), one programmable relay, a fixed auxiliary output and resettable 24V 250mA output, two keys and two inputs for programmable functions. It also includes a 6 * 40 Character LCD an integrated USB port for PC programming and an RS485 port for repeaters. The DXc2 can operate as a stand-alone or as part of a networked system with other DXc series panels up to 16 loops.

The CD contains a loop and battery calculator, manuals and programming software that allow the display to be customised and address labels to be imported from an Excel file.

• Total Loop Capacity (198 Detector + 198 Devices)
• Networking up to 16 loops (Combination of 1; 2 & 4 Loops)
• 6x40 characters, blue liquid crystal display with backlight illumination
• Configuration by keypad and PC
• 160 Fire Zones
• Fire, Fault and Auxiliary relays
• Loop-Battery calculator for reliable system design
• 7 day timer
• Onboard diagnostic
• EN54-2, EN54- 4
• LPCB approved
• Optional: 40, 80 or 160 zone alarm LEDs

Download Brochure

DXc4 Four Loop Control Panel

This addressable four-loop, fire detection system supports Morley protocol. It comes with two sounder circuits (1A max), a 2A power source, a general relay (Alarm and Fault), one programmable relay, a fixed auxiliary output and resettable 24V 250mA output, two keys and two inputs for programmable functions. It also includes a 6 * 40 LCD graphic display, an integrated USB port for PC programming and an RS485 port for repeaters. The DXc2 can operate as a stand-alone or as part of a networked system with other DXc series panels up to 16 loops.

The CD contains a loop and battery calculator, manuals and programming software that allow the display to be customised and address labels to be imported from an Excel file.

• Total Loop Capacity (396 Detector +396 Devices)
• Networking up to 16 loops
• 6x40 characters, blue liquid crystal display with backlight illumination
• Configuration by keypad and PC
• 160 Fire Zones
• Fire, Fault and Auxiliary relays
• Loop-Battery calculator for reliable system design
• 7 day timer
• Onboard diagnostic
• EN54-2, EN54- 4
• LPCB approved
• Optional: 40, 80 or 160 zone alarm LEDs

Download Brochure

NFN-GW-PC-F

NOTI•FIRE•NET™ Gateway PCI Card for multimode fibre media

Honeywell’s NOTI•FIRE•NET™ Gateway is an intelligent gateway interface for the ONYXworks® fire monitoring workstation. It facilitates complete monitoring and control of a NOTI•FIRE•NET™ network, and it supports full panel programming and network diagnostics.

• Enables ONYX® Series workstation to monitor alarm, pre-alarm, trouble, and disabled events for Notifier fire alarm control panels on a NOTI•FIRE•NET™ network
• Adds acknowledge, silence, reset, enable/disable, and activate/deactivate control capability to the workstation
• Supports fire alarm control panel programming upload/downloads and modifications
• Standalone embedded version for: ability to scale, remote IP connections
• Supervised IP connections for remote workstations and gateways
• Multiple workstations can access the gateway at the same time
• Compatible with ONYXWorks® and ONYX FirstVision

Download Brochure

NFN-GW-EM-3

NOTI•FIRE•NET™ Gateway (embedded)

Honeywell’s NOTI•FIRE•NET™ Gateway is an intelligent gateway interface for the ONYXworks® fire monitoring workstation. It facilitates complete monitoring and control of a NOTI•FIRE•NET™ network, and supports full panel programming and network diagnostics. This embedded version is a standalone gateway and is equipped with IP capability thus enabling ONYX® Series users to monitor multiple sites over an Ethernet network without the need for remote workstations. It includes a PC board and surge suppressor (PNET-1).

• Enables ONYX® Series workstation to monitor alarm, pre-alarm, trouble, and disabled events for Notifier fire alarm control panels on a NOTI•FIRE•NET™ network
• Adds acknowledge, silence, reset, enable/disable, and activate/deactivate control capability to the workstation
• Supports fire alarm control panel programming upload/downloads and modifications
• Standalone embedded version for: ability to scale, remote IP connections
• Supervised IP connections for remote workstations and gateways
• Multiple workstations can access the gateway at the same time
• Compatible with ONYXWorks® and ONYX FirstVision

Download Brochure

FIRSTVISION-LCD

ONYX FirstVision™ User Interface Software and Hardware Package

ONYX FirstVision™ is a revolutionary wayfinding navigational tool for fire fighters and other emergency responders. Its touchscreen, interactive interface graphically displays critical information on the origin and spread of a fire, allowing fire fighters to quickly locate and extinguish it. Crucial information is easy to access with a spatial, graphical depiction of the location of activated detectors and detector sequence of activation for one or multiple buildings. It displays a summary of building floor plans with detailed information about the building. Details can include locations for all fire alarm devices; water supplies; evacuation routes; access routes; chemical and structural hazards in the building; and shutoffs for gas, power, and HVAC.

• 22” LCD touchscreen with intuitive display
• Interfaces with ONYX® Series panels or NOTI•FIRE•NET(version 5.0 or higher) through the NFN Gateway over Ethernet
• Compatible with standard and High Speed NOTI•FIRE•NET™
• Supports multiple gateways for large networks and campuses
• Easy access to building, emergency contacts, site plan, and alarm event information
• Priority based event list display
• Includes on-board Ethernet, USB ports, 1 software licence and screen configuration software

Download Brochure